BT1 (IADC 121) Soft to Medium Formations The BT1 is the fastest tricone drilling bit offered by Bit Brokers. This steel tooth bit model is designed with long "A" shaped teeth, widely spaced and fully hard faced from crest to root for maximum penetration rates in formations that range from moderately soft to medium soft. This design is most effective in formations with compressive strengths under 5,000, such as shale, clay, red bed, medium limestone and unconsolidated formations. The BT1 also features the absence of deletions on the gage side of teeth on the heel row of the number two cone. This insures maximum gage life along with tooth life in more abrasive formations. Effective operating weights are from 1,000 to 3,000 pounds per inch of bit diameter with corresponding rotary speeds of 200 to 50 RPM.
BT2 (IADC 211) Medium to Medium-Hard Formations The BT2 offers the combination action of chipping, crushing, and gouging/scraping provided because of reduced cutter offset. The teeth are shorter "A" shaped and more closely spaced teeth than those of bits designed for softer formations. Long crests in the outer row teeth have self-sharpening hard facing applied for maximum penetration and longer bit life. This design will most economically drill medium and medium hard formations and was designed to replace the softer formation bits in strata where shale alternates with streaks of limestone and sandstone or where gypsum tends to ball up between the teeth. The most effective weight range varies from 1,000 to 5,000 pounds per inch of bit diameter, while rotary speeds of 150 to 50 RPM give best performance. Rotary speed should be decreased as weight is increased.
BT3 (IADC 311) Hard Formations The BT3 operates best in hard, abrasive formations such as hard sandy limestone, limestone interspersed with cherty streaks, broken shale, dolomite, granite, and abrasive sand. This bit is especially constructed to withstand the stresses imposed in drilling hard formations under heavy weights. The gage teeth are hard faced with tungsten carbide. There are no interruptions on the heel row teeth and the inner row teeth are short and closely spaced for maximum strength. Other features include balanced bearing design and extra thick cone shells. The most economical bit performance is obtained with weights of 3,000 to 8,000 pounds per inch of bit diameter. Corresponding rotary speed should range between 100 and 40 RPM. It is a recommended practice that the rotation speed should decrease when increasing drilling weight.
BT3H (IADC 321) Very Hard Formations Hard, abrasive formations requiring maximum resistance to gage wear are best drilled with the BT3H bit. The bit provides the necessary chipping and crushing action on bottom and drills efficiently in formations such as siliceous limestone, dolomite, sandstone, and granite. The gage surfaces of the cones have webs joining adjacent heel teeth, which insures great resistance to wear. Inner row teeth are short and closely spaced to withstand maximum stress. This bit is designed to drill most efficiently in hard formations with weights ranging from 3,000 to 8,000 pounds per inch of bit diameter. Rotary speeds should decrease from 100 to 40 RPM as weight is increased.

Bit Brokers is Quality Rock Bits. Since 1988 we have kept our clients ahead of schedule and under budget by providing the highest quality tools at the best possible prices. We supply the industry with quality tools such as, Hole Openers, PDC Reamers, Tricones, Tricone Cutters, Hammers & Hammer Bits, PDC Bits, and Drag Bits.

 

We ship to 50 states and 82 different countries, and serve industries such as Construction, Oil & Gas, Mining, Horizontal Directional Drilling (HDD), Water, Geothermal and Environmental. Our experienced staff is here to assist you with everything from choosing the right bit to shipping around the globe.

 

CALL NOW TO SPEAK WITH ONE OF OUR PRODUCT SPECIALISTS! 618-435-5811

All Right Reserved 2017 Bit Brokers International, Ltd.

Contact Us

BIT BROKERS INTERNATIONAL

5568 Logan Road,

West Frankfort, IL USA

62896

Bit Brokers International Ltd BBB Business Review

Phone : 618 - 435 - 5811

Fax : 618 - 435 - 2388

Your Source for Rock Bit, Hole Opener, Reamer, Tricone Bit, PDC Bit, Hammer Bit and Drag Bit Tools.